Soft Baby Swimming Float is a great help for baby to swim, it is one of the necessary swimming accessories for baby natatorium and family, but it would cause some bad phenomena if it is used inappropriately, here are some tips for Soft Baby Swimming Float:
1、Plastic products throw off peculiar smell, especially when you take off the packing, so article should be placed in a ventilated place for a while before use.
2、The volume of the gas should be 80% of airbag, cover the valve immediately after inflate, place it for half hour to ensure that there is no leak before use.
3、Adjust the tightness of the shoulder straps while wear the article for your baby, the tightness of shoulder straps is really important, baby would slide if it is too loose.
To let new born babies swim that is fashionable and also it is an acceptable thing for most of mothers, wear a swimming neck ring for your baby, put baby into a pool, baby can do exercises in water, so how do you use baby swimming neck ring correctly? It would hurt your baby if you use it in a wrong way, let's learn together about the correct way to use baby swimming neck ring with the baby angel's Encyclopedia.
1、The article should be inflated and placed for one night after use, check if there is leak.
2、When wear neck ring for a young baby, tease the baby to raise his head first, so as not to put the baby's chin in the neck ring, to avoid the circumstance that the button cannot be buckled.
3、Force apart the object with your hands, and then wear it for baby.
4、Check whether it is tight for baby, so that the baby's jaw can be placed in the groove of the swimming circle, then button up the buckle.
5、Check whether it is tight for baby, so that the baby's jaw can be placed in the groove of the swimming circle, then button up the buckle.
6、To avoid the explosion do not use the electric air pump to inflate, please use the hand pump or foot pump.
7、The article should not be over-inflated, the volume of gas should be 80% of airbag.
8、During baby swims, you cannot move baby by holding the neck ring, you better move baby by holding the hands or ass.
9、It would bring discomfort to baby if over inflate the article, and cause limitation of motion in cervical, and the child's jaw must be raised so much to fit the neck ring.
Baby swimming seat tube is different from other kinds of swimming ring，it's a bit more difficult to wear，so how do you wear it for your baby? Baby swimming encyclopedia introduces you to use it:
1、Inflate the airbags of both sides respectively, first fill the inner layer and after fill the outer layer, the volume of gas should be 80% of airbag.
2、After inflating, should immediately cover pneumatic valve of both sides, and press the valve into the article, smooth the surface, and then check whether there is air leakage.
3、Undo the buckle of swimming seat tube.
4、Before wearing article, you can wet baby's body first, then it would be easier to put on.
5、Put baby in the center of the ring, and put baby's feet in the center of the ring and then put it up until the baby's chest, press the bulge part of inner ring by hands, put ring on from baby's feet, and put the baby's two legs in the baby's swimming seat cushion and until baby's chest.
6、Button up the buckle, please ensure it in order to use it safely.
7、In order to ensure baby swims safely, please double check the ring before use, and please use under the adult's supervision.
8、Dry the article after use, and place it in a cool place, and do not expose it under the sun.
9、When wear article for baby, please be gentle in movement and do not do it rudely to avoid the tear and the leak and even the damage to baby's delicate skin.
Range of application: This product is not a life-saving device. It is suitable for 1-4 year-old babies. Please use under the adult's supervision.
1、Please check whether the inner diameter is suitable for the baby's chest circumference before use, and check whether there is air leak and whether the inflation is appropriate, it is suggested that the inner diameter should be 0.5cm bigger than baby's chest circumference, otherwise it would be too tight for baby, If it is too loose, a small soft towel can be placed on the baby's back to provide more comfort.
2、It is necessary to wear the article for baby by 2 people, firstly put baby's feet in the center of the ring and then put it up until the baby's chest, to avoid the tear and the leak, please be gentle in movement and do not do it rudely.
3、Another way is to immerse the article into the water and undo the safety buckle, hold babies' armpits from behind, put baby into the pool (provide more lubrication) and put baby's feet in the center of the ring and then put it up until the baby's chest, finally button up the secure buckle. Then finish this operation by only 1 person and also makes baby comfortable.
4、To clean the article with soft cloth soaked in water or the soft cloth soaked in 1:100 concentration of the "84" dilute disinfectant.
1.The article should be inflated and placed for one night after use, check if there is leak.
2.When wearing neck ring for a young baby, tease the baby to raise his head first, so as not to put the baby's chin in the neck ring, to avoid the circumstance that the button cannot be buckled.
3.It is necessary to always ensure that the fastener is in a tight position during use.
4.To avoid the explosion do not use the electric air pump to inflate.
5.Put down those 2 handles.
6.Handles should be held when baby swims.
7.Put the mouth downward.
1.The bonded surface must be dry, clean, dust-free or grease-free, otherwise it will affect the solidifying velocity and bonding strength. Locate the leak and release the gas.
2.If the hole is very small, such as only 3 mm, then only need to secure with a few spots of glue or use special healant, will be dry in 4 hours then a few spots of glue again, in another 4 hours can be used normally.
3.Article should be stored in a cool place after use.
1、Use detergent to wipe away the stains and grease stains, then clean them with clean water and dry them in a ventilated place.
2、Do not expose the baby swimming rings under the sun. The material of the swimming ring is easy to be aging, yellowish and crisp.
3、Baby swimming ring can not be sterilized by 84 disinfectant, otherwise would be corroded.
4、Do not directly scald baby swimming rings with boiling water, and sterilize baby bathing rings with alcohol.
5、If the baby swimming ring is not used for a long time, the swimming ring can be deflated, folded and stored in a cool place.
6、Clean the swimming rings with water after each use.
The new bathtub and bathing bed are mainly built for babies,so that parents can wash babies heads and baths for babies more easily and more conveniently,we select 0.3mm imported eco-friendly PVC materials,which also comply with EN-71,ASTM,RoHs,ATBC and Non-Phthalate environmental standards.
The new arm rings is designed with a transparent outer airbag,more fashionable,and it is designed with double different sizes airbags,we select 0.3mm imported eco-friendly pvc materials,which also comply with EN-71,ASTM,RoHs,ATBC and Non-Phthalate environmental standards.
The new baby swimming ring is improved as the special edition based on the original,we add an airbag in tail position.
The materials that we select are 0.3mm imported eco-friendly PVC,and which also comply with
EN-71,ASTM,RoHs,ATBC and Non-Phthalate environmental standards.
The Smurfs is the new series of brand Relaxing Baby,and is newly designed and developed.Consists of 4 items,Soft Swimming Float,Multi-function Seat Tube,U Shape Swimming Trainer,and Round Baby Swimming Neck Ring.
ALL materials that we use are imported eco-friendly 0.35mm PVC.It is tasteless,not-toxic,and does not release harmful substances,comply with EN-71,ASTM,RoHs,ATBC and Non-Phthalate environmental standards,all production processes are strictly monitored to ensure that all products meet customper requirements.