Check category
Company news
Trend news

News Detail

How to repair?

Views:

/

1.The bonded surface must be dry, clean, dust-free or grease-free, otherwise it will affect the solidifying velocity and bonding strength. Locate the leak and release the gas.

2.If the hole is very small, such as only 3 mm, then only need to secure with a few spots of glue or use special healant, will be dry in 4 hours then a few spots of glue again, in another 4 hours can be used normally.

3.Article should be stored in a cool place after use.

Previous : Instructions:
Next : Clean up
Previous : Instructions:
Next : Clean up

Related News

Usage Method Of Soft Baby Swimming Float 2018-09-05 16:16:00
Soft Baby Swimming Float is a great help for baby to swim, it is one of the necessary swimming accessories for baby natatorium and family, but it would cause some bad phenomena if it is used inappropriately, here are some tips for Soft Baby Swimming Float: 1、Plastic products throw off peculiar smell, especially when you take off the packing, so article should be placed in a ventilated place for a while before use. 2、The volume of the gas should be 80% of airbag, cover the valve immediately after inflate, place it for half hour to ensure that there is no leak before use. 3、Adjust the tightness of the shoulder straps while wear the article for your baby, the tightness of shoulder straps is really important, baby would slide if it is too loose.
Usage Method Of Swimming Neck Ring 2018-09-05 16:14:00
To let new born babies swim that is fashionable and also it is an acceptable thing for most of mothers, wear a swimming neck ring for your baby, put baby into a pool, baby can do exercises in water, so how do you use baby swimming neck ring correctly? It would hurt your baby if you use it in a wrong way, let's learn together about the correct way to use baby swimming neck ring with the baby angel's Encyclopedia. 1、The article should be inflated and placed for one night after use, check if there is leak. 2、When wear neck ring for a young baby, tease the baby to raise his head first, so as not to put the baby's chin in the neck ring, to avoid the circumstance that the button cannot be buckled. 3、Force apart the object with your hands, and then wear it for baby. 4、Check whether it is tight for baby, so that the baby's jaw can be placed in the groove of the swimming circle, then button up the buckle. 5、Check whether it is tight for baby, so that the baby's jaw can be placed in the groove of the swimming circle, then button up the buckle. 6、To avoid the explosion do not use the electric air pump to inflate, please use the hand pump or foot pump. 7、The article should not be over-inflated, the volume of gas should be 80% of airbag. 8、During baby swims, you cannot move baby by holding the neck ring, you better move baby by holding the hands or ass. 9、It would bring discomfort to baby if over inflate the article, and cause limitation of motion in cervical, and the child's jaw must be raised so much to fit the neck ring.
Usage Method Of Swimming Seat Tube 2018-09-05 16:08:00
Baby swimming seat tube is different from other kinds of swimming ring，it's a bit more difficult to wear，so how do you wear it for your baby? Baby swimming encyclopedia introduces you to use it: 1、Inflate the airbags of both sides respectively, first fill the inner layer and after fill the outer layer, the volume of gas should be 80% of airbag. 2、After inflating, should immediately cover pneumatic valve of both sides, and press the valve into the article, smooth the surface, and then check whether there is air leakage. 3、Undo the buckle of swimming seat tube. 4、Before wearing article, you can wet baby's body first, then it would be easier to put on. 5、Put baby in the center of the ring, and put baby's feet in the center of the ring and then put it up until the baby's chest, press the bulge part of inner ring by hands, put ring on from baby's feet, and put the baby's two legs in the baby's swimming seat cushion and until baby's chest. 6、Button up the buckle, please ensure it in order to use it safely. 7、In order to ensure baby swims safely, please double check the ring before use, and please use under the adult's supervision. 8、Dry the article after use, and place it in a cool place, and do not expose it under the sun. 9、When wear article for baby, please be gentle in movement and do not do it rudely to avoid the tear and the leak and even the damage to baby's delicate skin.  

ShenZhen Swimming Baby Care Co.,Ltd

TEL：86 760-2363 3273 / 2363 3051 

FAX：sales@anbelcorp.cn

Manufacturer:Shuizihao industrial district,Yumin,Dongsheng Town,Zhongshan 528400,Guangdong,China

qr

Copyright(C)Zhongshan Anbel Plastic manufacturing Ltd All rights reserved  粤ICP备15013109号
Powered by www.300.cn

Feedback

Customer Service

Telephone

+86-760-23633273

whatsapp

Whatsapp

Scan
QR Code

TOP